Here’s a pic of the guard tower at the top of the freeway. I’m not going to glue it down, so I can re-use it as scatter terrain. I’m going to add a few more signs, some more rust and some little details like an ammo can. The back (sorry, pic tomorrow) is a fire escape that Atomic Bob accidentally broke off a building during one of our first games. Hey, it ain’t broken junk, it’s scatter terrain.
This whole piece cost me about .50 cents. Seriously. I think about 35 cents of that is paint,
I went to Home Depot and got three tubes of Loctite “Repair Putty” (epoxy putty) to build up my base. I could have used 4, but meh…it looks pretty good. Here’s where I stopped last night.
Can you see my vision yet?
I ran out of the Brown Earth and had to start using Dark Earth. That just means I’ll have to do some actual painting to blend in the dark patches and the edge.
I found a bag of rubble that I had previously prepared. This stuff is easy to make, really. You get a piece of plastic, use paving tape (I used Woodland Scenics) to make a box shape and fill it with plaster in which you’ve mixed in some paint (concrete in this case). When dry, you just bend the plastic and it all breaks up very nicely.
Anyway, I hope you can see my “vision”. I’ll post more later.
Look at the picture below. Surely you can see what I’m trying to decide while some glue dries. I’ve sacrificed a freeway span and solved my “broken span” problem. Now, do I sacrifice the F-16?
I’m planning on making it look like the jet crashed into the freeway, in case you didn’t guess. I plan on lots of rubble (which I have to plaster-cast still), graffiti, lots of dirt and sawing the F-16 in half to make it look half-buried.
What do you think? It’s a nice piece. I might be out a cool jet if I screw it up…
I’ll be getting it. I don’t know if I’m down for switching to 32mm from 15mm because of the time/money investment in my scenery collection, but it looks super cool and I’m a Fallout Fanboi….
Hey, I got somewhere. Bummer is the brown acrylic paste I have that I used for the basing…I ran out of. I still have a full tub of the ‘Dark Earth’ but that means I’ll have to hit it liberally with paint to get it to blend in. Maybe they have some down at the hobby shop… I have some ideas for the ‘onramp’ where the characters can get to the top. Basically it’ll be a separate section of with a collapsed span.
If you have any good ideas/comments/criticism, I’d love to hear it. Preferably before I get farther into the project. 🙂
Base section with brown acrylic paste
Pre-glue construction brainstorming
I can see what it’s going to look like when complete at least